background image

MAINTENANCE 

OM 0401-A 

22

1. Hydraulic line 
2. Cardboard 
3. Magnifying glass

M

AINTENANCE

 

ALWAYS USE GENUINE PARTS WHEN 
REPLACEMENT PARTS ARE REQUIRED

 

 
Storage 

1. 

Check hardware at regular intervals to 
ensure it is always tightened properly. 

2. 

Never park the tractor inside a building 
where an open flame or sparks are present.  
Allow the engine to cool down before storing 
in any enclosure

.

 

 

WARNING:

 

Provide adequate blocking 

before working under the debris blower when 
in raised position.

 

 
Hydraulic Oil 

Check oil level before each use.  Refer to the 
operation's manual of the HP2120, HP2025 and 
HP2134 hydraulic pumps. 

IMPORTANT: If you own a HP2120 hydraulic 
pump, it is recommended to use the 
5RDF0037 update kit. 

 

ATTENTION

:  Escaping 

hydraulic/diesel fluid under pressure can 
penetrate the skin causing severe injuries. 

 

Do not use your hands to 
check for leaks.  Use a 
piece of cardboard or paper 
to search for leaks. 

 
 
 
 
 

 

Shut engine off and relieve pressure 
before connecting or disconnecting lines. 

 

Tighten all connections before starting 
engine or pressurizing lines. 

 

If any fluid is injected into the skin, obtain 
medical attention immediately or 
gangrene may result. 

 

Содержание BL2130













































Отзывы: