Frontier BL2130, Руководство оператора

Страница: 19 / 44

ASSEMBLY
OM 0401-A
17
5. Figure 6e: Install the rubber bushings (items 1-
2) on the support then attach the oil cooler
(item 3) with four 5/16" NC x 2 1/4" bolts
(item 4), 5/16" flat washers (item 5), the flat
washers supplied with the rubber bushings
(item 6) and 5/16" NC nylon insert nuts
(item 7).
IMPORTANT: Position the oil cooler so the by-
pass valve (item 8) faces the rear as illustrated.
6. Figure 6f: Install the 1 5/8" ORB – 1 1/16" JIC
elbows (item 1) on the oil cooler's inlet and
outlet in the positions illustrated. Connect the
straight end of the outlet hose (item 2) to the oil
cooler elbow and the bent end to the filter.
Connect the inlet hose (item
3) previously
disconnected from the filter to the other elbow
making sure it passes outside the support plate
(item 4).
7. Figure 6g: Connect the oil cooler fan harness
(item 1) to the available connector on the
hydraulic pump's wiring harness (item 2).
Figure 6f
Figure 6e
Figure 6g
1
2