Fronius Virtual Welding 2.0 Скачать руководство пользователя страница 16

Страница: 16 / 152

The device is intended for welding simulation only with the software and hardware supplied

by the manufacturer.

Utilization for any other purpose, or in any other manner shall be deemed improper.

The manufacturer shall not be liable for any resulting damage.

Intended use also means:

Carefully reading and adhering to all instructions in these Operating Instructions

Carefully reading and understanding all warnings on the device

Carrying out all the specified inspection and maintenance work

Establishing the mains connection according to the specifications on the rating plate

Installation in closed and dry rooms

Never:

Convert the device yourself

Handle the device incorrectly

Operate the device with programs other than the manufacturer's software

Operate, service, or repair the device without observing the Operating Instructions

The device is designed for operation in closed and dry rooms. The manufacturer shall not

be liable for any damage resulting from use in other environments.

The manufacturer shall also not be liable for faulty or incorrect training success.

Warning notices

on the device

Warning notices and safety symbols can be found on the StandUp Terminal and Mobile

Case. These warning notices and safety symbols must not be removed or painted over.

They warn against incorrect operation, as this may result in serious injury and property

damage.

Содержание Virtual Welding 2.0

























































































































































Результаты поиска

Содержание Virtual Welding 2.0

Отзывы:

Бренды по названию

Популярные бренды

Fronius Virtual Welding 2.0, Руководство по эксплуатации

Результаты поиска

Содержание Virtual Welding 2.0

Отзывы:

Бренды по названию

Популярные бренды