Fronius TPS 320i, Руководство по эксплуатации

Страница: 68 / 106

66
Welding parame-
ters for MIG/MAG
standard syner-
gic welding The following welding parameters for MIG/MAG standard synergic welding can be set and
displayed by selecting the "Welding" menu button:
Explanation of
footnotes 1) Synergic parameter
When a synergic parameter is changed, the synergic function automatically chang-
es all other synergic parameters to match.
Current recomm value
1)
Unit A
Setting range depends on the welding process and welding program selected
Before the start of welding, the device automatically displays a standard value based on
the programmed parameters. During welding, the actual value is displayed.
Voltage recomm value
1)
Unit V
Setting range depends on the welding process and welding program selected
Before the start of welding, the device automatically displays a standard value based on
the programmed parameters. During welding, the actual value is displayed.
Material command value
1)
Unit mm in.
Setting range 0.1 - 30.0 mm
2)
0.004 - 1.18
2)
Feeder command value
1)
for setting a harder, more stable arc
Unit m/min ipm.
Setting range 0.5 - max.
2)
19.69 - max
2)
Arc length correction
for correcting the arc length
Setting range -10 - +10
Factory setting 0
- shorter arc length
0 neutral arc length
+ longer arc length
Pulse/dynamic correction
for influencing the short-circuiting dynamic at the moment of droplet transfer
Setting range -10 - +10
Factory setting 0
- harder, more stable arc
0 neutral arc
+ soft, low-spatter arc