background image

You will now be prompted to select one of the main menu items for the configur-
ation mode:

When you select a menu item you
may be presented with a symbol
prompting you to read the Operating
Instructions. Confirm this prompt by
pressing the "Stop/Start" key again.

The procedure for navigating the configuration menu and its submenus is as
follows:

1

Use the "Up/Down" keys to select the desired menu item

 

2

Use the "Stop/Start" key to confirm the menu item, and re-
confirm any double-check prompt (e.g. "OK?")

3

Use the "Up/Down" keys as necessary to choose an item, e.g.
"Off/On" or enter a value

 

4

Use the "Stop/Start" key to confirm what you have entered

 

 

5

If the cursor moves to another setting or position after con-
firmation of the previous setting, repeat the procedure de-
scribed in points (3) and (4)

To exit the current menu:

 

6

Press the "Menu" key to return to the higher-level menu

Charging set-
tings

The following section provides a detailed explanation of the "Charging settings"
menu item in configuration mode. Navigation is carried out as described in the
"Configuration mode" section.

34

Содержание Selectiva Li 16 kW 8210





























































Отзывы: