Fronius Selectiva Li 16 kW 8210, Руководство по эксплуатации

Страница: 39 / 60

Normal
- Start ON:
Charging starts when an external switch is closed and a battery is detected
or when the charging plug is connected by closing the auxiliary contacts and
a battery is detected.
- Start OFF:
Charging starts when a battery is connected.
- Stop ON:
Charging is interrupted when an external switch is opened
or when the charging plug is disconnected by opening the auxiliary contacts.
- Stop OFF:
The opening of an external switch or the auxiliary contacts is ignored.
“Contact detection”
- ON:
If a battery is connected when "Start ON" is set and the external start/stop
contact is not closed, the status message (16) "External start/stop is not
closed" appears.
If charging has been started when "Stop ON" is set, the external start/stop
contact is opened and the battery is not fully charged, and the status mes-
sage (16) "External start/stop is not closed" appears.
- OFF:
Contact detection is not executed.
Setting for "External lamp”
According to the "Charging lights" section of the "Options" chapter, suitable sig-
nal lamps can be connected in order to visualize the state of charge or the oper-
ating status of the battery charger.
The following settings are available:
- Normal (conventional signal lamps)
- RGB (LED strips)
"Remote control system"
The contrast for the remote control system can be adjusted.
CAN
39
EN