Fronius Selectiva Li 16 kW 8210, Руководство по эксплуатации

Страница: 25 / 60

Charging the battery
Charging
WARNING!
Danger due to improper handling of the lithium battery.
This may result in serious injury and damage to property.
▶
Note the following points without exception:
▶
Only connect lithium batteries that have been approved by the manufacturer
to the charger.
▶
Never expose the lithium battery to naked flames. Excessive heat can cause
the battery to ignite or explode.
▶
If the lithium battery becomes damaged due to improper handling, poison-
ous substances can escape which are harmful to health.
▶
Do not drop the lithium battery into water. This may lead to a short circuit.
This in turn can cause the battery to become hot, ignite or explode.
▶
Do not charge batteries with visible damage.
WARNING!
Danger due to a faulty battery.
This may result in serious injury and damage to property.
▶
Before charging, ensure that the battery is in full working order.
NOTE!
Danger due to very dirty charging plug contacts.
This can result in damage to property.
▶
The resulting increase in contact resistance can lead to overheating and sub-
sequent destruction of the charging plug.
▶
Keep the charging plug contacts free from impurities and clean them if ne-
cessary.
1
Connect the charger mains plug to the electrical mains supply
The display appears in standard mode. The display shows the charger paramet-
ers:
- Type of battery (Li-Ion)
- Charging characteristic, e.g. Fronius Li-Ion
- Charger voltage range, alternates with the maximum output current, or only
the battery nominal voltage if a battery is connected
- Connection status:
Not connected, or
Connected
- Day of the week, date and time
The charger parameters can be set individually. More information on the charger
parameters can be found under "Configuration mode" in the "Display functions"
25
EN