manualshive.com logo in svg

Fronius Robacta Reamer Alu 3000upm, Руководство по эксплуатации, Страница: 44 / 92

Поделиться
Скачать
Fronius Robacta Reamer Alu 3000upm Скачать руководство пользователя страница 44

Fitting the cleaning cutter on the Robacta Ream-

er Alu 3000upm

Fitting the
cleaning cutter

CAUTION!

A cleaning cutter that has become very hot through use can cause severe burns.

Before handling cleaning cutters, allow cleaning cutter to cool to room temperat-
ure (+25°C, +77 °F).

NOTE!

Only use the device manufacturer's contact tips, gas nozzles and cleaning cut-
ters.

If other manufacturers' products are used, trouble-free operation of the device
cannot be guaranteed. The manufacturer accepts no liability for damage result-
ing from the use of other manufacturers' contact tips, gas nozzles or cleaning
cutters.

NOTE!

The cleaning cutter and adapter are not included in the scope of supply.

Consult the device manufacturer's spare parts list for the appropriate cleaning
cutter and adapter.

1

Remove the protective covering from the cleaning device

2

3

Fit the protective covering to the cleaning device in its original position

44

Содержание Robacta Reamer Alu 3000upm





























































































Отзывы:

Нет отзывов