Fronius Robacta Reamer Alu 3000upm, Руководство по эксплуатации

Страница: 48 / 92

Adjusting the Robacta Reamer Twin lifting device
Adjusting the
lifting device It is recommended that one of the following adjustment aids is used to adjust the
lifting device:
- Robacta Twin 900 adjustment aid, item no. 42,0001,5560
An adjustment aid is not necessary when the gas nozzle is open, as the welding
torch is clamped above the gas nozzle. The gas nozzle can be removed before-
hand. The bracket must be back in the starting position. When the gas nozzle is
mounted, the bracket must be closed.
(1) (1)
(2) (2)
(3) (3)
1
Remove the protective cover (1)
2
Ensure that the lifting device is in
its lowest lift position
3
Loosen the screw (2) on the lifting
device
4
Move the welding torch to the
cleaning position (including fitted
adjustment aid)
5
Push the lifting device (3) by hand
into its highest lift position and
hold in place
(5) (5) (5)
(4) (4) (4)
000
,,,555
---111
mmm
mmm
...000
222
---...
000
444
iiinnn
...
6
Push the cleaning motor (4) and
cleaning cutter by hand into the
cleaning position (5)
NOTE!
The cleaning cutter must not touch
any welding torch components.
7
Fix the cleaning motor (4) in this
position in the lifting device - tight-
en the screw (2) on the lifting
device
8
Fit the protective cover to the
cleaning device in its original posi-
tion
48