Fronius IG Plus 100 V-1, Руководство по эксплуатации

Страница: 142 / 168

140
Description Too many power stage sets have been detected in the system.
Remedy If status code persists: Contact a Fronius-trained service tech-
nician
513
Power stage set in boot mode
Description One or more power stage sets cannot be activated, because
they are in boot mode.
Remedy Update power stage set firmware
514
No communication with one of the power stage sets
Description Warning message from one of the power stage sets, second
power stage set working normally
Remedy If status code persists: Contact a Fronius-trained service tech-
nician
515
Faulty plug connections
Description Temperature sensor on cooling element faulty or not connected
properly.
Remedy If status code persists: Contact a Fronius-trained service tech-
nician
516
Status codes present for one of the power stage sets.
Description It is not possible to activate all power stage sets
Remedy Carry out analysis. For more information, see the ‘The setup
menu’ section. If status code persists: Contact a Fronius-trained
service technician
517
Change of master has taken place.
Description Transformer not connected / not plugged in
Bridge short-circuit
Detection of intermediate circuit voltage damaged
Remedy Check possible errors referred to in ‘Description.’ If status code
persists: Contact a Fronius-trained service technician
550
String fuse defective.
Description One or more string fuses are defective.
Remedy Test string fuses and replace any that are defective