Fronius Eco 25.0-3-S, Руководство по эксплуатации

Страница: 29 / 196

29
EN
If no key is pressed for 2 minutes:
- The inverter switches from wherever it is on the menu level back to the "NOW" display
mode (exception: "Standby" Setup menu item).
- The display backlighting goes out unless it has been set to ON in Display Setting -
Backlighting (see Display Setting - Backlighting).
- The power currently being fed in is displayed or the currently active state code is dis -
played.
Setting menu en -
tries, general
Open the desired menu
Use the 'Up' or 'Down' keys to select the desired menu item
Press "Enter"
Application ex -
ample: Setting
the time
The available settings are displayed: The first digit of a value to be set flash -
es:
Use the 'Up' or 'Down' buttons to se -
lect the desired setting
Press the 'Enter' key to save and ap -
ply the setting.
To discard the setting, press the 'Esc'
key.
Use the 'Up' or 'Down' keys to select
a value for the first digit
Press "Enter"
The second digit of the value flashes.
Repeat steps 4 and 5 until ...
the whole value to be set flashes.
Press "Enter"
Repeat steps 4 - 6 as required for
units or other values that are to be set
until the appropriate unit or the value
flashes.
Press the 'Enter' key to save and ap
-
ply the changes.
To discard the changes, press the
'Esc' key.
The currently selected menu item is dis -
played.
The currently selected menu item is dis -
played.
1
2
3
4
5
4
5
6
7
8
9
Select "Clock" from the Setup menu
Press the "Enter" key
1
2