32
Stick out
Stick out and spacing of the wire electrodes:
(1)
Gas nozzle
(2)
Trail power source
(3)
Lead power source
Tilt angle of the
welding torch
Welding torch tilt angle neutral to slightly forward
Select the welding torch tilt angle so that,
depending on the direction of welding, the
lead wire electrode (= the electrode of the
lead power source) is positioned neutrally
or slightly forward.
Arc combination
options
Different arc types can be combined in the "Drive EasyTwin" process.
The welding direction is defined by the wire pairing (Ø 1.2 mm lead power source/Ø 1.0
trail power source) and the construction of the welding torch.
The arc combination option pulsed - pulsed is only possible with the LHSB TPS installation
kit.
Ø 1,2 mm
Ø 1,0 mm
18 mm
~8 mm
(1)
(2)
(3)
90 - 100°
Lead wire electrode
(= lead power source)
Trail wire electrode
(= trail power source)
Pulse
Pulse
Standard
Pulse
PCS
Pulse
Содержание Drive EasyTwin
