Fronius CU 1100i, Руководство по эксплуатации

Страница: 34 / 84

(1) (2)
Air inlet openings and air outlet openings
CAUTION!
Danger from insufficient cooling air
supply.
This can result in severe damage to prop-
erty.
▶
Air inlet openings (1) and outlet open-
ings (2) must never be covered, not
even partially.
Dust
Ensure that any metallic dust, for example from grinding work, is not sucked into the sys-
tem by the fan.
Outdoor operation
The device can be set up and operated outdoors in accordance with degree of protection
IP23. Avoid direct wetting (e.g. from rain).
Guarantee provi-
sions regarding
the coolant pump The coolant pump may only be used with original coolant supplied by the manufacturer.
Do not allow the coolant pump to run dry (even for a very short time), as this will destroy
the coolant pump. The manufacturer accepts no liability for damage caused in such
cases.
Intended use The device is intended solely for use in conjunction with Fronius system components.
The device is to be used exclusively for its intended purpose.
Any use above and beyond this purpose is deemed improper. The manufacturer is not
liable for any damage, or unexpected or incorrect results arising out of such misuse.
Proper use also includes:
-
Fully reading and understanding these Operating Instructions
- Following all the instructions and safety rules in these Operating Instructions
- Performing all stipulated inspection and servicing work
The device is designed for use in industry and the workshop. The manufacturer accepts
no responsibility for any damage caused through use in a domestic setting.
34