Fronius AccuPocket 150/400 TIG, Руководство по эксплуатации

Страница: 38 / 88

(6) Welding process button
for selecting the welding process
(7) On/Off button
for switching the power source on and off.
The button must be pressed for at least two seconds before it responds
(to protect against accidental operation)
(8) Adjusting dial
(9) TAC indicator
lights up when the tacking function is activated
(only possible on TIG devices during the TIG welding process)
(10) Setting value button
for selecting the desired setting value (1)
(11) Status indicators
display various operating modes of the power source:
-
VRD
- lights up if the (optional) VRD safety device is present
and the reduced safety voltage is present at the welding sockets
-
Setup - lights up in Setup mode
-
Temperature - power source outside the permitted temperat-
ure range
-
Error
- see also
Troubleshooting
from page
61
38