Fronius Acctiva Easy 12/24, Руководство по эксплуатации

Страница: 26 / 100

Safety measures
in normal opera-
tion - Chargers with PE conductors must only be operated on a mains supply with a PE
conductor and a socket with an earth contact. If the charger is operated on a mains
supply without a PE conductor or in a socket without an earth contact, this will be
deemed gross negligence. The manufacturer shall not be held liable for any damage
arising from such usage.
- Only operate the charger in accordance with the degree of protection shown on the
rating plate.
- Under no circumstances operate the charger if there is any evidence of damage.
- Ensure that the cooling air can enter and exit unhindered through the air ducts on
the charger.
- Arrange for the mains and charger supply to be checked regularly by a qualified
electrician to ensure the PE conductor is functioning properly.
- Any safety devices and parts that are not functioning properly or are in imperfect
condition must be repaired by a qualified technician before switching on the charger.
- Never bypass or disable protection devices.
- After installation, a freely accessible mains plug is required.
EMC Device Clas-
sifications Devices in emission class A:
-
Are only designed for use in industrial settings
- Can cause line-bound and radiated interference in other areas
Devices in emission class B:
-
Satisfy the emissions criteria for residential and industrial areas. This is also true for
residential areas in which the energy is supplied from the public low-voltage mains.
EMC device classification as per the rating plate or technical data.
EMC measures In certain cases, even though a device complies with the standard limit values for emissi-
ons, it may affect the application area for which it was designed (e.g. when there is sen-
sitive equipment at the same location, or if the site where the device is installed is close
to either radio or television receivers).
If this is the case, then the operating company is obliged to take appropriate action to
rectify the situation.
Data protection The user is responsible for the safekeeping of any changes made to the factory settings.
The manufacturer accepts no liability for any deleted personal settings.
Maintenance and
repair Under normal operating conditions, the device requires only a minimum of care and
maintenance. However, it is vital to observe some important points to ensure it remains
in a usable condition for many years.
-
Before switching on, always check the mains plug and cable as well as charger
leads and charging terminals for any signs of damage.
- If the surface of the device housing is dirty, clean with a soft cloth and solvent-free
cleaning agent only
Maintenance and repair work must only be carried out by authorised personnel. Use only
original replacement and wearing parts (also applies to standard parts). It is impossible
to guarantee that bought-in parts are designed and manufactured to meet the demands
made on them, or that they satisfy safety requirements.
Do not carry out any modifications, alterations, etc. to the device without the manufactu-
rer's consent.
26