Fromm P325.0001.01, Руководство по обслуживанию

Страница: 50 / 52

8-16
P325mane.fm
9.2 Exchange of cutter, welding stop gripper and welding gripper
Disassembling
• Unscrew cover P32.2066 and remove it;
• Unscrew end cover P35.3211 and remove it;
• Remove the torsion spring N2.5823 and the tensioning body;
• Remove the tensioning wheel together with the bearing N3.1172 from the tool;
• Disassemble the security ring N2.1118 and remove the lever P32.1414 from the handle shaft;
• Don’t loosen screw N1.1553 at the coupler P32.1251.
• Disassemble the security ring N2.1121 from the coupler, remove the coupler;
• Pull out the centering sleeve P32.1710 from the guide case to left, disassemble the guide case;
• Pull out the pressure spring with a screw driver from the cutter P35.3214;
• Remove the cutter from the driving pin P32.1032;
• Disassemble the screws N1.1305, lift slightly the welding stop gripper P35.3128 and the steel insert P35.3127
and remove them from the tool;
• Push the steel insert without welding stop gripper under the welding gripper P32.1511 until it touches the parallel
pin N2.2110;
• Press down lever P32.2028, if the welding gripper does not sit on the steel insert, put a piece of plastic strap
between welding gripper and steel insert.
• Disassemble the safety ring N2.1121 from the bolt P32.1028, remove the bolt from the welding gripper;
• Press in coupler P32.1410 in order to release the lever P32.2028 again;
• Pull out the steel insert with care to right under the welding gripper;
• Disassemble the security rings N2.1121 from the driving pin P32.1032, remove the driver P32.1035 from the
driving pin;
• Lift the rocker P32.1510 behind the welding gripper with a screw driver, remove the welding gripper together with
the ball cage P32.1027 and the balls N3.1702 from the tool;
• Lower the rocker, remove the thrust piece P32.1029 from the tool.
N2.1121
P32.1035
N2.1121
P32.1035
N1.1904
N1.1929
N1.6503
P32.2066
P32.1710
N2.1121
Pressure spring
P32.1028
P32.1027
6 x N3.1702
P35.3127
N1.1305
N1.6504
P32.1511
P35.3211
N1.1925
N1.6504
N2.1118
P32.1414
P32.1032
P32.1410
P32.2028
Molykote
BR2 plus
Loctite 222
Klüber Isoflex Alltime SL2
Klüber Isoflex NBU 15
P32.1029
P35.3214
Tensioning wheel
N2.5823
Tensioning body
N3.1172
Mobilux EP2
P32.1251
N1.6503
N1.1904
P35.3128
Guide case