30
1.
Reference Figure . Locate the four wind vane compass rose indicators of N, E, S, W
(representing North, East, South and West). Align the compass rose direction upon
final
installation
with
a
compass
or
GPS.
Figure 8
2.
Reference Figure 98. Make sure the sensor array is completely level upon final installation.
Failure to do so will result in inaccurate rain gauge readings.
Figure 98
4.3.5 Reset Button and Transmitter LED
In the event the sensor array is not transmitting, reset the sensor array.
With an open ended paperclip, press and hold the
RESET BUTTON
for three seconds to
completely discharge the voltage.
Take out the batteries and wait one minute, while covering the solar panel to drain the
voltage.
Содержание IP Observer WH2600 SE
