Froggit IP Observer WH2600 SE, Руководство по эксплуатации

Страница: 21 / 60

21
Required
Step Description Section
1 Assemble and power up the sensor array 01 - 03
2 Power up the indoor thermometer-hygrometer-barometer 0
3 Power up the receiver, connect to your router and synchronize with
sensor array and thermo-hygrometer-barometer. 0
6 Mount the sensor array 0
5
Calibrate the relative pressure to sea-level conditions (local airport)
on console
0
7 Reset the rain to zero on console 0
9 Register and upload to Weather Server 0
3.Pre-Installation Checkout and Site Survey
3.1 Pre Installation Checkout
Before installing your weather station in the permanent location, we recommend operating
the weather station for one week in a temporary location with easy access. This will allow
you to check out all of the functions, insure proper operation, and familiarize you with the
weather station and calibration procedures. This will also allow you to test the wireless range
of the weather station.
3.2 Site Survey
Perform a site survey before installing the weather station. Consider the following:
5. You must clean the rain gauge every few months and change the batteries every 1-2
years. Provide easy access to the weather station.
6. Avoid radiant heat transfer from buildings and structures. In general, install the sensor
array at least 5’ from any building, structure, ground, or roof top.
7. Avoid wind and rain obstructions. The rule of thumb is to install the sensor array at
least four times the distance of the height of the tallest obstruction.
8. Wireless Range. The radio communication between receiver and transmitter in an
open field can reach a distance of up to 100 meter, providing there are no interfering
obstacles such as buildings, trees, vehicles, high voltage lines. Wireless signals will
not penetrate metal buildings.
9. Radio interference such as PCs, radios or TV sets can, in the worst case, entirely cut
off radio communication. Please take this into consideration when choosing receiver
or mounting locations. Make sure your receiver is at least five feet away from any
electronic device to avoid interference.