13
GB
CAUTION:
Never insert screwdrivers or other items
between the fan grilles.
CAUTION:
Never touch electrical parts with wet hands
or bare feet.
CAUTION:
To ensure efficient operation of the
compressor and evaporator unit, never block
the air intakes.
CAUTION:
For appliance on wheels, check that the
installation surface is level and perfectly
horizontal.
CAUTION:
Before any maintenance work on the motor
compartment, disconnect the appliance from
the electricity supply and remove the upper
protective grille.
CAUTION:
Wait long enough for the preset temperature
to be reached before placing food in the cold
storage appliance.Never place hot drinks or
food inside. Always cover foods with food-
grade plastic films before inserting them.
CAUTION:
All our appliances must be installed by
skilled, authorized technicians familiar with
refrigeration and electrical systems. They
must only be used by suitably trained staff.
Extraordinary maintenance procedures,
such as cleaning and servicing of the
refrigeration system, must be carried out by
skilled, authorized technicians familiar with
refrigeration and electrical systems.
1.4 ITEMS TO BE PREPARED BY THE CUSTOMER
-
Provide a high sensitivity (30 mA) differential
security breaker.
- Provide a mains power socket with earth.
- Ensure that the surface on which the appliance is to be
installed is perfectly flat.
- In case of appliances with water-cooled condensers or
appliances with direct control of the humidity, provide
mains water supply and drain connections.
1.5 BEFORE CONTACTING THE AFTER-SALES
SERVICE...
Malfunctions are very often caused by simple problems
which the user can solve for himself. Before contacting
your after-sales service, make the following simple
checks:
A. IF THE APPLIANCE STOPS OPERATING:
- check that the plug is fitted into the mains power
supply socket correctly.
B. IF THE TEMPERATURE INSIDE THE COLD
STORAGE APPLIANCE IS NOT LOW ENOUGH:
- check that the temperature is not affected by a
nearby heat source;
- check that the door closes securely;
- check that the foods inside are distribuited so that
they do not interfere with ventilation inside the
appliance.
C. IF THE APPLIANCE IS TOO NOISY:
- check that the appliance is not in loose contact with
any other object;
- check that the appliance is perfectly level.
After making the above checks, if the fault persists
contact your after-sales service. Remember to specify the
following:
- the nature of the defect;
- the appliance's code and serial number, which you will
find on its nameplate.
1.6 ORDERING SPARE PARTS
Always use ORIGINAL SPARE PARTS.
The manufacturer declines all responsibility for non
original spare parts.
2. TECHNICAL DATA
The characteristics - plate is placed on the back of the
refrigerated cabinet and in the motor room.
2.1 NOISE LEVEL
Leq
in the noisiest point at 1 mt in operating conditions
< 70 dB(A)
Lpc
at 1 mt.in operating
< 130 dB(C)
TESTING ENVIRONMENT
The test was performed inside a rectangular exposure
room without soundproofing treatments. There were no
significant obstacles in the area around the appliance.
REFERENCE STANDARDS
The measurements in the noise level tests were made in
accordance with Italian Decree Law n. 277 using the
procedures described in ISO 230-5, in order to collect the
data required by EEC directive 89/392.
MACHINE OPERATING CONDITIONS
The measurements were made in the most heavy-duty
operating conditions, during the start-up phase known as
"POOL DOWN".
2.2 MATERIALS AND FLUIDS USED
Zones in contact with foodstuffs are in AISI 304 stainless
steel or in white plastic-coated galvanized steel plate
which has undergone a non-toxic treatment. These
zones are fitted with fan grilles in non toxic plastic, while
the metal fasteners and supports are in stainless steel.
The accessories such as shelves, bowls and trolleys
intended for contact with foodstuffs are in stainless steel,
or in plastic-coated, chrome-plated steel (RILSAN), or in
non-toxic plastic suitable for foodstuffs under EC
Directive 89/109.
The evaporator unit is in copper-aluminium with
corrosion-proof paint.
The refrigerant units are filled with HFC refrigerating fluid.
