Fritsch LABORETTE 27 Скачать руководство пользователя страница 23 | Manualshive

Страница: 23 / 36

Fritsch LABORETTE 27 Скачать руководство пользователя страница 23

7

Cleaning

DANGER!
Mains voltage!
– Before beginning with cleaning work, disconnect the

mains plug and protect the device against being unin-

tentionally switched back on!

– Do not allow any liquids to flow into the device.
– Indicate cleaning work with warning signs.
– Put safety equipment back into operation after

cleaning work.

When cleaning the entire device, adhere to the guidelines of

the Accident Prevention Regulation (BGV A3) ‐ especially if

the device has been set up in a dusty environment or if pro‐

cessing grinding stock that produces dust.

n

If necessary, lift the dividing head from the drive shaft (sliding disc is

glued to the dividing head).

n

Keep the motor drive shaft dust-free

n

Do not use force when fitting the dividing head.

n

Remove material from the funnel, dividing head and sample bottles

using a vacuum cleaner.

n

After wet cleaning, rinse the funnel, dividing head and sample bot-

tles with alcohol (ethanol) and air dry.

Cleaning

- 23 -

«
...
21
22
23
24
25
...
»

Содержание LABORETTE 27





































Отзывы:

Нет отзывов