Fritsch LABORETTE 27 Скачать руководство пользователя страница 10 | Manualshive

Страница: 10 / 36

Fritsch LABORETTE 27 Скачать руководство пользователя страница 10

ENVIRONMENT!
This symbol and keyword combination points out a possibly

hazardous situation that can result in environmental

damage if not avoided.

To call attention to specific hazards, the following symbols are used in

the safety information:

DANGER!
This symbol and keyword combination points out a directly

hazardous situation due to electrical current. Ignoring infor-

mation with this designation will result in serious or fatal

injury.

DANGER!
This symbol and keyword combination designates contents

and instructions for proper use of the machine in explosive

areas or with explosive substances. Ignoring information

with this designation will result in serious or fatal injury.

DANGER!
This symbol and keyword combination designates contents

and instructions for proper use of the machine with com-

bustible substances. Ignoring information with this designa-

tion will result in serious or fatal injury.

WARNING!
This symbol and keyword combination points out a directly

hazardous situation due to movable parts. Ignoring infor-

mation with this designation can result in hand injuries.

WARNING!
This symbol and keyword combination points out a directly

hazardous situation due to hot surfaces. Ignoring informa-

tion with this designation can result in serious burn injuries

due to skin contact with hot surfaces.

Special safety information

Safety information and use

- 10 -

«
...
8
9
10
11
12
...
»

Содержание LABORETTE 27





































Отзывы:

Нет отзывов