Fritsch LABORETTE 27 Скачать руководство пользователя страница 16 | Manualshive

Страница: 16 / 36

Fritsch LABORETTE 27 Скачать руководство пользователя страница 16

4.3.1 Fitting the dividing head

n

Place the dividing head onto the drive shaft protruding from the

housing.

n

Checking: The dividing head must turn freely on the friction clutch by

hand.

4.4 Electrical connection

Disconnect the supply voltage prior to maintenance or

cleaning work.
Observe the accident prevention and safety regulations

which apply to the specific application cases.
Before the initial start‐up it should be checked whether the

nominal voltage of the device corresponds to the local

mains voltage.
Protective conductor connections must be checked for per‐

fect working order before the initial start‐up.
Connections may be established only by authorised per‐

sonnel.

The LABORETTE 27 is constructed according to the state of

the art and in accordance with the EC machinery directive

and recognized safety rules. However, the life and limb of

the user or third parties may still be endangered or the

device or other material assets impaired when using the

device.

Installation

- 16 -

«
...
14
15
16
17
18
...
»

Содержание LABORETTE 27





































Отзывы:

Нет отзывов