Fritsch LABORETTE 27 Скачать руководство пользователя страница 12 | Manualshive

Страница: 12 / 36

Fritsch LABORETTE 27 Скачать руководство пользователя страница 12

2.5 Device safety information

n

Only use original accessories and original spare parts. Failure to

observe this instruction can compromise the safety of the machine.

n

Accident-proof conduct is to be strictly followed during all work.

n

Comply with all currently applicable national and international acci-

dent prevention guidelines.

CAUTION!
Wear hearing protection!
If a noise level of 85 dB(A) is reached or exceeded, ear pro-

tection should be worn to prevent hearing damage.

WARNING!
The maximum accepted concentration (MAC) levels of the

relevant safety guidelines must be observed; if necessary,

ventilation must be provided or the machine must be oper-

ated under an extractor hood.

DANGER!
Explosion hazard!
– When dividing oxidizable substances, e.g. metals or

coal, there is a risk of spontaneous combustion (dust

explosion) if the share of fine particles exceeds a cer-

tain percentage. When dividing these kinds of sub-

stances, special safety measures must be taken and the

work must be supervised from a specialist.

– The LABORETTE 27 is not explosion protected and is

not designed to divide explosive materials.

n

Do not remove the information signs.

NOTICE!
Immediately replace damaged or illegible information signs.

n

Unauthorised alteration of the LABORETTE 27 will void Fritsch's dec-

laration of conformity to European directives and void the guar-

antee.

n

Only use the LABORETTE 27 when it is in proper working order, as

intended and in a safety- and hazard-conscious manner adhering to

the operating manual. In particular, immediately rectify any malfunc-

tions that could pose a safety hazard.

n

If, after reading the operating manual, there are still questions or

problems, please do not hesitate to contact our specialised per-

sonnel.

Please observe!

Safety information and use

- 12 -

«
...
10
11
12
13
14
...
»

Содержание LABORETTE 27





































Отзывы:

Нет отзывов