23
Installation
4.7.1
Connection of the camera to the lens and insertion
1.
Remove the caps from the camera and from the screw thread of the lens.
Screw the lens hand-tight onto the camera!
(a) USB connection for data transmission
(b) Flash and current supply control
2.
Connect the camera as shown in the picture.
3.
Insert the camera with lens. To do this, hold the lens tilted backwards in
the device housing, as shown in the picture, and hook the flat rail runner
onto the rail from behind. Then tilt the lens forwards and position it on the
rail. The lens holder can be moved back and forth on the rail.
NOTICE
Only remove the front cap from the lens once it is
located on the rail!
4.
Remove the front cap and push the flat rail runner in the direction of the
falling chute as far as the end stop.
5.
When the flat rail runner is seated at the end stop, secure it with the two
knurled screws.
The lens is recognised automatically by the device and shown
in the software.
4.8
Connections for supply units
The following connections are located on the left side of the wet dispersion unit:
Содержание ANALYSETTE 28 IMAGESIZER
Страница 59: ...59 Safety logbook Date Maintenance Repair Name Signature ...
Страница 61: ......
