Fritsch 16.60 0 Series, Руководство по эксплуатации

Страница: 8 / 42

NOTICE!
This laboratory instrument is designed for 8-hour shift
operation at 30% duty cycle.
The device may not be used as a production machine or
put into continuous operation.
2.2.1 Operating principle
Comminution in the cross beater mill is performed by beating, impact
and shearing. After feeding the material for comminution into the funnel,
it enters the grinding chamber where the comminution process takes
place between the beating cross, the grinding insert and the bottom
sieve.
As soon as the material for comminution has reached the appropriate
final fineness, it passes through the bottom sieve into the collecting
vessel.
If a textile filter hose is used between the cross beater mill and the col-
lecting vessel, a backup of the material caused by the air current created
by the rotating beating cross is avoided, and an increase in material
throughput is to some extent achieved.
This ensures a gentle comminution process.
2.3 Obligations of the operator
Before using the PULVERISETTE 16, this manual is to be carefully read
and understood. The use of the PULVERISETTE 16 requires technical
knowledge; only commercial use is permitted.
The operating personnel must be familiar with the content of the oper-
ating manual. For this reason, it is very important that these persons
actually receive the present operating manual. Ensure that the operating
manual is always near the device.
The PULVERISETTE 16 may exclusively be used within the scope of appli-
cations set down in this manual and within the framework of guidelines
put forth in this manual. In case of non-compliance or improper use, the
customer assumes full liability for the functional capability of the PUL-
VERISETTE 16 and for any damage or injury arising from failure to fulfil
this obligation.
By using the PULVERISETTE 16 the customer agrees with this and recog-
nizes that defects, malfunctions or errors cannot be completely excluded.
To prevent risk of damage to persons or property or of other direct or
indirect damage, resulting from this or other causes, the customer must
implement sufficient and comprehensive safety measures for working
with the PULVERISETTE 16.
Safety information and use
- 8 -