The TIME continues lighting up, REST will flash, press UP/DOWN to set rest time
0:01~9:59 circularly (Figure 34). Press ENTER to confirm along with buzzer beeps 1s
and INTERVAL CUSTOM continues lighting up.
Cycle time counts down from 3 to 0 then console start, meanwhile buzzer beeps once
per second and READY flashes once per second, counting displays ‘00/XX’(Figure 35).
Cycle time counts down from the preset total time and WORK flashes once per
second . Then TOTAL TIME, DISTANCE, CALORIES, WATTS, SPEED & RPM start
calculating, counting displays ‘01/XX’(Figure 36).
Cycle time counts down from and REST flashes once per second along with buzzer
beeps(Figure 37), meanwhile READY will flash in last 3s(Figure 38).
The above
③
&
④
continue cycle counting and add 1 per each cycle, until the WORK
setting value finished then go to End page.
3
4
5
6
7
In WORK mode, buzzer beeps 1s then enter into wake up mode if no any signal inputs
within 30s.
Press START button once enter into PAUSE mode, Buzzer will sound for 0.5s in every
30s. All values are displaying on LCD and flashing in every 4s. If continue to stop
training for 5 minutes, buzzer sounds 2s and enter to Wake-up mode. Press START
to resume
8
10
11
12
Press STOP or end up training, buzzer beeps 1s then displays TOTAL TIME, DISTANCE,
CALORIES for 30s, and WATT, SPEED & RPM will switch to display AVG. & MAX. PULSE
window will switch to display 65%, 85% MAX (Figure 21~23) each 5s.
With pulse signal input, PULSE window will display user actual pulse. Pulse window
displays nothing if no pulse signal input (Figure 19~20).
Press any PROGRAM key then perform the program accordingly.
9
Figure 32
Figure 33
Figure 34
Figure 35
Custom
00/01
WORK
00/99
0:01
Custom
TIME
REST
00/99
0:01
Custom
TIME
READY
00/99
0:03
Custom