
52
Ital
ian
o
En
gl
is
h
19.3
CLEANING THE BASE OF THE APPLIANCE
At the end of the cycle, if necessary, clean the base of the appliance.
Ordinary maintenance operations can be carried out by unskilled personnel by scrupulously following the
instructions below.
The internal and external surfaces can be washed with a sponge dampened in warm water, using chemically
non-aggressive detergents; after cleaning, dry with a soft cloth. The application of products designed to
produce shiny surfaces is recommended only on the external walls. It is advisable to clean the fans and the
chamber periodically, using the sanitising product supplied, by activating the cleaning function and spraying
the fans whilst in motion. The operation to be performed with the door open.
19.4
REPLACEMENT OF LED SPOTLIGHT (W60-W45)
The LED spotlights can be found on the top section of the compartment. To replace the lights following the
instructions below:
Switch the appliance off by pressing the ON/OFF key and disconnect the plug from the socket. Remove the
lights from their housings using a flat screwdriver. Disconnect the LED spotlight from their connectors. Do not
pull on the wires, as this may damage the internal electric connections. Replace the lights and place any
excess cable in its housing. The lights will snap into place when pushed into the round housing.