17
Accessories
O
T
O
H
P
N
O
I
T
P
I
R
C
S
E
D
L
E
D
O
M
VPAWP1-8
VPRG4
RT4
RT5
VPSC2
VPAL2
VPAWP1-14
3
/
4
1
8
7
8
5
8
WALL PLENUM
Two-part sleeve that telescopes in and out
from 5 ½" to 8" in depth. The wall plenum sits inside the
exterior wall penetration.
DIMENSIONS: 30 ⅜" high x 24 " wide.
COUTOUT DIMENSIONS: 30 " high x 24 " wide.
Same as VPAWP1-8, but telescopes 8" to 14" as required.
ARCHITECTURAL LOUVER
Extruded aluminum louver that
attaches to the outdoor section of the wall plenum.
DIMENSIONS: 31 " high x 25 " wide.
1
16
9
16
Same as VPAL2 but can be ordered in a special color to match
the exterior wall.
DIGITAL REMOTE WALLL THERMOSTAT
Single stage
thermostat, used on VERT-I-PAK units. Hard wired with single
speed fan. Direct replacement for RT2.
DIGITAL REMOTE WALL THERMOSTAT
Single stage
thermostat. Features high/low fan speed switch. Thermostat is
hard wired and can be battery powered or unit powered.
Features backlit display and multiple configured modes.
ACCESS PANEL / RETURN AIR GRILLE –
Serves as an access
panel to chassis and interior return air grille. A field-supplied (25"
x 20") filter is mounted inside the hinged access door.
Kit contains hinge bracket for mounting the door with the return air
openings high or low on the door for optimal sound attenuation. For
9,000 / 12,000 / 18,000 Btu models, it is recommended to install
the door with the hinge on the right side and the return air
openings high on the door. For 24,000 Btu models, it is recom-
mended to install the hinge on the left side with the return air
openings low on the door.
DIMENSIONS: 58" high x 29" wide.
COUTOUT DIMENSIONS: 55 " high x 27" wide.
RT6
DIGITAL REMOTE WALL THERMOSTAT
Single stage
cool, single stage heat thermostat. Features high/low fan
speed switch. Thermostat is hard wired and can be battery
powered or unit powered. Features backlight display and
multiple configuration.
