5
Make sure the wiring is adequate for your unit.
install or relocate this unit, be sure that the amperage rating of the circuit
1
DO NOT use an extension cord.
The cord provided will carry the proper amount of electrical power to the
Make sure that the receptacle is compatible with the air
conditioner cord plug provided.
electrician. The grounded receptacle should meet all national and local
with the air conditioner.
Test the power cord
00
1.
Plug power supply cord into a grounded 3 prong outlet.
2.
1
3.
4.
damaged, it must be replaced with a new power supply cord from the
00 1
WARNING: Before Operating Your Unit
MODEL
CIRCUIT RATING
OR TIME DELAY
FUSE
REQUIRED WALL
RECEPTACLE
AMP
VOLT
NEMA NO.
• SQ06
SQ08 •EQ08
15
125
5-15P
Table 1.
WARNING
Electrical Shock Hazard
Make sure your electrical receptacle has the
same configuration as your air conditioner’s
plug. If different, consult a Licensed Electrician.
Do not use plug adapters.
Do not use an extension cord.
Do not remove ground prong.
Unplug unit prior to performing any service.
Always plug into a grounded 3 prong oulet.
Failure to follow these instructions can result in
death, fire, or electrical shock.
NOTICE
Do not use the LCDI device as an ON/OFF switch.
Failure to adhere to this precaution may cause
premature equipment malfunction.
Figure 1
FRR072
WARNING:
TEST BEFORE EACH USE!
1. PRESS REST BUTTON.
2. PLUG LCDI INTO POWER
RECEPTACLE.
3. PRESS TEST BUTTON,
RESET BUTTON SHOULD
POP UP.
4. PRESS RESET BUTTON
FOR USE.
DO NOT USE IF ABOVE TEST
FAILS.
WHEN GREEN LIGHT IS ON.
IT IS WORKING
PROPERLY!
RESET
TEST
