17
STEP 4.
Place unit in window with the bottom support rail up against the
onto upper support rail. The unit should be slightly
1
1
on the type of window, install the appropriate
security lock as recommended by manufacturer.
CAUTION
Cut/Sever
Although great care has been
taken to minimize sharp edges
in the construction of your unit,
use gloves or other hand
protection when handling unit
Failure to do so can result in minor
to moderate personal injury.
STEP 5.
1
1 1
1
curtains using both screw holes and your unit sleeve directly to
the lower window stool using the instruction Steps 5.1 - 5.3 shown
Steps 1 - 5, then you can proceed to Step 6 found on Page 18.
Pull unit from sleeve, using the side handles located on
1
STEP 5.1.
Figure 15
Figure 16
Figure 17
SECURE TO WINDOW
SASH THROUGH TOP
SCREW HOLE
THIS STEP MUST BE FOLLOWED COMPLETELY TO INSURE
UNIT IS ADEQUATELY SECURED TO WINDOW.
SECURE TO
WINDOW JAMB
THROUGH
BOTTOM / SIDE
SCREW HOLE
