24
Final Inspection & Start-up Checklist
u
installed properly and that they have not been damaged during the
installation progress.
u
for the removal of condensate water, and that they meet the approval
of the end user.
u
Ensure that all installation instructions concerning clearances around
indoor coil, and outdoor coil are free from any obstructions.
u
supply cord, insure that it is stored properly.
u
Ensure that the entire installation is in compliance with all applicable
u
Secure components and accessories, such as a decorative front
cover.
u
Start the unit and check for proper operation of all components in
each mode of operation.
u
NOTE:
recommended.
u
necessary.
This is a warm weather appliance
0 1
11
1
cool a room if it is already cool outside.
Condensation is normal
outside. Humidity becomes water, and your air conditioner will use most
Frosting
and the frost will disappear. Setting the thermostat a little warmer
will probably prevent the frosting from recurring.
Noises
1
