Friedrich DWC1, Инструкция по установке и эксплуатации

Страница: 16 / 139

16 DWC1 Programmable Thermostat
Installation instruction
Installer Setting - Dry Contact Mode Setting
Function Code Dry Contact
setting value
Select Dry contact setting by
pressing button.
(00 : Manual, 01 : Automatic)
3
Press button to save.
4
If pressing button long for 3
seconds, it enters into remote
controller setter setup mode.
- If pressing once shortly, it enters
into user setup mode. Please press
more than 3 seconds for sure.
1
If pressing button repeatedly, it moves to
remote controller dry contact mode setup
menu as picture below.
2
Pressing button will exit settings mode.
❈
After setup, it automatically gets out of
setup mode if there is no button input for
25 seconds.
❈
When exiting without pressing set button,
the manipulated value is not reflected.
5
Dry contact function is the function that is possible to use only when dry contact equipment is
separately purchased/setup.
•
Please refer to dry contact manual for more details.
▶
What is Dry Contact?
Like hotel card key and it is the signal of the point of contact when using air-conditioner by
interlocking.