Friedrich DWC1, Инструкция по установке и эксплуатации

Страница: 12 / 139

12 DWC1 Programmable Thermostat
Installation instruction
Function code,
ESP code
ESP value
Press button to save.
7
Select ESP fan step again by using
button and setup ESP value, as No. 4
and 5, that corresponds each wind flow 6
Press button to exit.
❈
After setup, it automatically gets out of
setup mode if there is no button input
for 25 seconds.
❈
When exiting without pressing set
button, the manipulated value is not
reflected.
8
•
Please be careful not to change the ESP value for each fan step.
•
It does not work to setup ESP value for very low/power step for some products.
•
ESP value is available for specific range belongs to the product.