![background image](http://html1.mh-extra.com/html/friedland/sa5/sa5_installation-and-operating-manual_2332730029.webp)
29
REMOTE PHONE ACCESS AND CONTROL
If enabled, this allows the system to be remotely
controlled via the telephone.
Default setting: OFF
Scroll through the menu until ‘
2-8 Remote Phone
Control
’ (and the current setting) is displayed.
To change the setting press .
Press to enable Remote Phone Control, or
Press to disable Remote Phone Control.
RINGS TO ANSWER PHONE
This sets the number of rings which occur before the
Control Panel will “pick up” the call to operate with the
Answerphone or Remote Phone Access features.
Default setting: 6
Scroll through the menu until ‘
2-9 Rings To Answer
Phone
’ (and the current setting) is displayed.
To change the setting press .
Enter the required number of rings (1-30).
Press to save and exit, or
Press to exit without saving.
DIALLER DELAY
If enabled, this delays the activation of the telephone
dialler following an alarm for a period of approximately
30 seconds to allow the system to be disarmed.
Default setting: ON
Scroll through the menu until ‘
2-10 Dial Delay
’ (and the
current setting) is displayed.
To change the setting press .
Press to enable the Dialler Delay, or
Press to disable the Dialler Delay.
DIAL METHOD
This enables the telephone dialler to be configured
for the type of exchange it is connected to. Most
exchanges are now Tone/DTMF systems).
Default setting: Tone/DTMF
Scroll through the menu until ‘
2-11 Dial Method
’ (and
the current setting) is displayed.
To change the setting press .
Scroll through the menu options, until the required
setting is displayed.
Press to save and exit, or
Press to exit without saving.
DIAL MODE
This controls whether the telephone dialler operates
with the Voice Dialler or Remote Security Monitoring
service.
Default setting: Voice Dialler
Scroll through the menu until ‘
2-12 Dialer mode
’ (and
the current setting) is displayed.
To change the setting press .
Scroll through the menu options, until the required
setting is displayed.
Press to save and exit, or
Press to exit without saving.