Frico Portier PS210A, Руководство пользователя

Страница: 12 / 15

Portier
15
GB
Residual current circuit breaker (E)
When the installation is protected by means
of a residual current circuit breaker, which
trips when the appliance is connected,
this may be due to moisture in the heating
element. When an appliance containing a
heater element has not been used for a long
period or stored in a damp environment,
moisture can enter the element.
This should not be seen as a fault, but is
simply rectified by connecting the appliance
to the mains supply via a socket without a
safety cut-out, so that the moisture can be
eliminated from the element. The drying
time can vary from a few hours to a few days.
As a preventive measure, the unit should
occasionally be run for a short time when it is
not being used for extended periods of time.
Safety
• For all installations of electrically heated
products should a residual current
circuit breaker 300 mA for fire protection
be used.
• Ensure that the area around the intake
and exhaust grille is kept free from
objects which could prevent the air to
flow through the unit!
• During operation the surfaces of the unit
are hot!
• The unit must never be covered fully or
partially with clothes, or similar which
can cause risk of fire!
• This appliance is not intended for use
by persons (including children) with
reduced physical or mental capabilities,
or lack of experience and knowledge,
unless they have been given supervision
or instruction concerning use of the
appliance by a person responsible
for their safety. Children should be
supervised to ensure that they do not play
with the appliance.