manualshive.com logo in svg

Frick QUANTUM LX AcuAir, Руководство пользователя, Страница: 5 / 96

Поделиться
Скачать
Frick QUANTUM LX AcuAir Скачать руководство пользователя страница 5

 

FRICK

®

  QUANTUM™ LX AcuAir

®

 CONTROL PANEL                  S90-510 CS (MAR 07) 

COMMUNICATIONS SETUP                                                                Page 5

 

SERIAL COMMUNICATIONS 

 

GENERAL DESCRIPTION 

 

Serial communications to and from the Quantum™ LX 
can use RS-232, RS-422 and/or RS-485 hardware 
protocol. These three hardware protocols can be 
connected via Com-1 and Com-2 for RS-422/485, and 
Com-2 and Com-3 for RS-232. The reason that Com-
2 can be either RS-232 or RS-422/485 will be 
explained in the section entitled Com-1 and Com-2 
Description. 
 
The Com-1 and Com-2 serial communications portion 

of the Quantum™ controller consists of a daughter 
board, mounted to the main controller. In addition to 
external forms of serial communication (to be 
discussed shortly), the keypad also connects here. 
Refer to the following pictorial of the Com-1 and Com-
2 communications daughter board. 
 
Com-3 is another serial port (RS-232) that may be 
used in addition to Com-1 and Com-2. The location of 
Com-3 is on the main processor board, as shown 
below will be explained in the section entitled Com-3 
Description. 

 

 
Com-1, Com-2 and Com-3 Ports 
 

COM-1 AND COM-2 DESCRIPTION 

 

 

The board pictured above actually has three 
serial communications ports (labeled as TB1, 
TB2 and TB3). TB1 is known as Com-1, and is 
reserved solely for RS-422/485 communications. 
It can be used for external communications to the 
outside world. 
 
TB2 is known as Com-2. However, TB3 is also 
known as Com-2. The difference here is that TB2 
is for RS-422/485 whereas TB3 is for RS-232. 
TB2 can be used in the same manner as TB1.   
 

When TB2 (Com-2) is setup to be used for RS-
422/485, then TB3 cannot be used for RS-232, and 
vice-versa. The reason for this is that there is a 
jumper (LK11) that needs to be properly set that will 
tell the controller which of the two ports will be used 
(either TB2 as RS-422/285 OR TB3 as RS-232). 

 

COM-3 DESCRIPTION 

 

Com-3 (PL6) is used for RS-232 hardware 
protocol only, and can be used in addition to any 
of the other communications ports that may be 
being used. So it is possible to have two RS-232 
ports active (Com-2 AND Com-3) at the same 
time, as well as Com-1 for RS-422/485. 

PL6 

Com-3 

RS-232 

TB1 

Com-1 

RS-422/485 

TB2 

Com-2 

RS-422/485 

TB3 

Com-2 

RS-232 

Содержание QUANTUM LX AcuAir

































































































Отзывы:

Нет отзывов