manualshive.com logo in svg

Frick QUANTUM LX AcuAir, Руководство пользователя, Страница: 3 / 96

Поделиться
Скачать
Frick QUANTUM LX AcuAir Скачать руководство пользователя страница 3

 

FRICK

®

  QUANTUM™ LX AcuAir

®

 CONTROL PANEL                S90-510 CS (MAR 07) 

COMMUNICATIONS SETUP                                                                Page 3

ASCII Notes ____________________________________________________________________________________ 36

 

RTU Query (Read) Example ________________________________________________________________________ 37

 

RTU Response Example___________________________________________________________________________ 37

 

MODBUS

®

 Notes_________________________________________________________________________________ 37

 

MODBUS

®

  Data Access _______________________________________________________________________ 37

 

HYPERTERMINAL ________________________________________________________________________38

 

Description _____________________________________________________________________________________ 38

 

Setting Up Hyperterminal __________________________________________________________________________ 38

 

Testing Communications___________________________________________________________________________ 43

 

General Notes ___________________________________________________________________________________ 43

 

QUANTUM™ DATA TABLES________________________________________________________________44

 

Digital Board Values ______________________________________________________________________________ 44

 

Analog Board Values _____________________________________________________________________________ 45

 

Calculated Values ________________________________________________________________________________ 46

 

Mode Values ____________________________________________________________________________________ 48

 

Timer Values ____________________________________________________________________________________ 64

 

Setpoint Values __________________________________________________________________________________ 65

 

WARNING/SHUTDOWN MESSAGE CODES ___________________________________________________77

 

QUANTUM™ 4 MAIN BOARD HISTORY AND IDENTIFICATION ___________________________________78

 

SERIAL COMMUNICATIONS PORT WIRING ___________________________________________________80

 

RS-232 Wiring And Jumpers________________________________________________________________________ 80

 

TB3, COM-2_________________________________________________________________________________ 80

 

PL6, Com-3 _________________________________________________________________________________ 80

 

RS-422 Wiring And Jumpers________________________________________________________________________ 81

 

TB1, COM-1_________________________________________________________________________________ 81

 

TB2, COM-2_________________________________________________________________________________ 81

 

RS-485 Wiring And Jumpers________________________________________________________________________ 82

 

TB1, COM-1_________________________________________________________________________________ 82

 

TB2, COM-2_________________________________________________________________________________ 82

 

Converting An RS-232 Signal To RS-422/485 ______________________________________________________ 83

 

APPENDIX A_____________________________________________________________________________84

 

Frick

®

 Serial Communications Converter Module ________________________________________________________ 84

 

Description _____________________________________________________________________________________ 84

 

Setting the jumpers _______________________________________________________________________________ 84

 

Mounting the module______________________________________________________________________________ 84

 

Wiring the module ________________________________________________________________________________ 85

 

RS-232 Connections __________________________________________________________________________ 86

 

RS-422 Connections __________________________________________________________________________ 86

 

RS-485 Connections __________________________________________________________________________ 86

 

APPENDIX B_____________________________________________________________________________86

 

Quantum™ LX Panel Software Update Procedure_______________________________________________________ 86

 

APPENDIX C_____________________________________________________________________________87

 

Quantum™ LX Ethernet Communications Wiring________________________________________________________ 87

 

Quantum™ LX Local Ethernet Configurations __________________________________________________________ 88 
Quantum™ LX Ethernet Network Configurations ________________________________________________________ 89 

APPENDIX D_____________________________________________________________________________90

 

Quantum™ LX Serial Communications Wiring __________________________________________________________ 90

 

SERIAL COMMUNICATIONS WIRING DIAGRAMS ______________________________________________92

 

Customer Remote Computer/DCS RS-485 Communications ______________________________________________ 92

 

Customer Remote Computer/DCS RS-422 Communications ______________________________________________ 92

 

INDEX __________________________________________________________________________________93

 

 
The Quantum™ has the capability of being modified by the user/owner in order to obtain different performance characteristics.  Any modification to the 
standard default settings may have a severe negative impact on the operation and performance of the equipment. Any modification to these control 
settings is the sole responsibility of the user/owner and Frick

®

 disclaims any liability for the consequences of these modifications. It is possible that the 

modification of these settings may cause improper operation and performance that results in property damage, personal injury or death. It is the 
responsibility of the user/owner to evaluate and assess the consequences of their actions prior to modifying the controls for this unit. 

 
 
 
 

Содержание QUANTUM LX AcuAir

































































































Отзывы:

Нет отзывов