Fri-Jado TDR 7, Руководство пользователя

Страница: 10 / 48

TDR 7/8 P
eco
Gas
EN 10 / 48
2. DESCRIPTION OF THE UNIT
2.1. Technical description
Heating takes place by means of gas that is burnt in a heat exchanger placed in the ceiling.
A fan mixes the gas and air, which mixture is ignited by means of an automatic ignition. The
combustion takes place in the inner part of the heat exchanger and is therefore not visible.
The flue gasses are discharged through a flue tube through the ceiling. Fans ensures an
equally divided heat. In order to maintain the set temperature the heat exchanger is
repeatedly switched on and off during the grilling process.
During the entire process, the interior of the unit will be illuminated by halogen lamps.
The unit control keeps the temperature inside the unit fixed to level set by the operator. The
control has a capability to store 99 different programs.
The rotor is being wheeled by a maintenance-free motor and gearbox. The glass panes are
equipped with a heat reflecting layer to keep the heat inside the grill.
The plating of the unit is made of stainless steel. The product contact parts are made of
stainless steel AISI 304 (eventual with PTFE coating). The mains cable is provided with a
plug.
Refer to the data plate for the applicable gas system.
2.2. Intended use
The TDR has been designed for grilling meat products. Any other use will not be regarded
as intended use.
The manufacturer accepts no liability whatsoever for loss or injury caused by failing to strictly
adhere to the safety guidelines and instructions in this manual or due to carelessness during
installation, use, maintenance and repair of the unit referred to in this manual and any of its
accessories.
Use the unit in perfect technical condition only.
2.3. Accessories
Your unit contains the following standard accessories:

Meat forks.

User manual.
For optional accessories refer to section 10 .