Fri-Jado MCC 120, Руководство по обслуживанию

Страница: 35 / 105

Service Manual MCC Cold US 20220700
Page 35
Doc. nr.
9124589
Rev.
0
Registration form.
MCC Drop in installation instruction
3
MCC Cold version:
Important remark before installation:
When installing Front doors on the drop in unit, Please follow Front door
installation procedure 9124721, until the step in which the glass is put in.
Placing the doors in a later stage, means the unit must be lifted again.
Installation must comply with:
• No spark-forming components or components with a high surface temperature
may be present in the substructure / counter where the furniture is placed.
• The refrigeration components must not be directly accessible by unauthorized
Personnel.
• Make sure that the furniture is still easily accessible for service after installation
by means of a removable hatch. The condenser must be cleaned regularly.
Keep enough space on the back of the unit, to enable servicing which implies
the back panel of the furniture can be removed.
• Provide enough space to place the furniture with a stacker.
Maintain the dimensions and minimum height as indicated in the installation
manual.
• Provide adequate ventilation; keep the minimum air inlet and outlet opening as
indicated in the installation manual. Place baffles to prevent hot exhaust air from
being sucked back through the condenser.
• Make sure that the room / shop in which the furniture is placed meets the
minimum dimensions as indicated in the installation manual.
• Make sure that the warning signs / labels are / remain visible after installation.
• Operation of the appliance must be accessible.
• Additional ventilation: prevent gas accumulation due to leakage. Used gas is
heavier then air.
• Avoid high temperatures in the vicinity of the furniture.
5.4 MCC Drop-in Installation (Self Serve)