background image

Page 16 

Service Manual MCC Cold  US 20220700

  

   

  Warning 

 

Electrical shock Hazard

  

 

 

•  

Grounding instructions:                 

 

 

 

Only connect the appliance to an alternating current, to a grounded wall 

 

 

 

socket, with a mains voltage in accordance with the information indicated on  

 

 

 

 

 

the type plate of the appliance. 

 

 

•  

It is the consumer’s responsibility to make sure the electrical installation 

 

 

 

conforms with current national and local codes and wiring regulations.

  • 

 

It is not allowed to use a multi plug or extension cord. Such can result in fire,  

 

 

 

 

 

electrical shock, or personal injury. 

   

   

 

 

 

Failure to follow these instructions can result in serious injury or in death.

4.1  Applying price rail

 

 

Optional price rails for Hot self-serve models can be mounted using the front screws underneath  

 

 

each of the Hot SS shelves. Do not loosen this screws entirely!  

 

Price rails for serve over models can be mounted on the air inlet grill and on the glass shelves.  

 

 

 

Cold self-serve models are supplied with price rails as standard.  

 

 

 

Price rail is integrated part of air guidance inside the unit. 

 

 

 

Removing the price rail will result in a bad functioning MCC

4.2  Repositioning the glass shelves on Cold FS/SS models 

 

The glass shelves can be positioned at three horizontal levels (I), or one of three angled   

 

 

 

positions (II and III) by changing the positions of the LED-armature with respect to the rear.

 Examples:

 

 

 

 

 

For repositioning details refer to User manual

4.3  Hot SS models

 

 

The glass shelves can be positioned at two angled positions (0º and 3º).  

 

Refer to user manual.

     

Содержание MCC 120










































































































Отзывы: