FRESENIUS MEDICAL CARE
MEDICAL TREATMENT CHAIR
INSTRUCTION MANUAL - T688B Series
Page 5 of 20
IFU T688B V2 Apr 2021
16. To allow the patient to rise from the chair, lower the chair and return it to the upright position. (press
and hold memory position #2 until in position)
17. Memory position #3 will be pre-set to a position suitable for renal dialysis, blood collection or similar
procedures, for ICU and emergency wards, or to a position suitable for side transfer. Press and hold
memory position button #3 until in position.
18. To reprogram the pre-set positions see Section: 3.3.2
19.
One Touch Memory Position function
(if fitted) allows the chair to move automatically to a
memory position without holding the memory position buttons. To operate, briefly press the required
memory position button (#1, #2, or #3) on the nurse hand control.
NOTE
: For emergency stop, press any button on either the nurse hand control or the patient hand
control (if fitted).
20. USB charger (if fitted) can be used to charge a USB device, such as a mobile phone, a music player
or a camera. Maximum output of the charger is 4 watt.
NOTE
: It may not charge all USB devices depending on the power input requirement of the USB
devices.
NOTE
: To use the USB charger, ensure the chair is plugged in the mains power. The USB charger
will NOT work when the chair is powered by backup battery.
21. Ensure procedural equipment is set up to avoid tubing and cords becoming trapped in the moving
parts of the chair (e.g. arm rests). DISCONNECT procedural equipment prior to removing patient
from chair.
22. The power cord should
always
be left in the power supply socket and switched on. The backup
batteries (if fitted) will recharge automatically and slow to trickle charge when full.
23. The chair can be disconnected from the mains power by switching off the mains power supply
socket or unplugging the power cord from the mains power.
