Freggia CHPA, Руководство пользователя

Страница: 12 / 40

12
USE AND MAINTENANCE
The active carbon fi lters are used to purify the air that is sent back into the room and its function is to mitigate the
unpleasant odours produced by cooking.
The non-regenerable active carbon fi lters must be replaced at least every 4 months. The saturation of the active
charcoal depends on the more or less prolonged use of the appliance, on the type of kitchen and on the frequency
with which anti-grease fi lter is cleaned.
REPLACING LED LAMPS
(FIG. 10)
This cookerhood is equipped by energy saving LED lamps. Please ask the specialized technician to replace them.
COMMANDS
Push-button A = On/off lights switch.
Push-button B = On/off cooker hood switch. The appliance switches on at speed
level 1, If the cooker hood is on depress the push-button for 2 sec. to switch off the
cooker hood. If the cooker hood is at speed level 1 it will not be necessary to depress
the push-button to switch the cooker hood off . Decreases the motor speed.
Display C = Indicates the motor speed level selected and activates the timer.
Push-button D = Switches on the cooker hood. Increases the motor speed. Touching the key at 3rd speed, the intensive
function runs for 6’, then the appliance go back to work at the original speed. During this function the display blinks.
Key E = The Timer times the functions on activation for 15 minutes, after which they are switched off . The Timer is
deactivated by re-pressing key E.
When the Timer is activated the decimal point must fl ash on the display. The Timer cannot be activated if the intensive
speed is functioning.
The “ CLEAN AIR ” function is activated by pressing key E for 2 seconds when the appliance is switched off . This switches
the motor on for 10 minutes every hour at the fi rst speed.
During functioning a rotary movement of the peripheral segments must be visualised on the display. When this time
has passed the motor switches off and the fi xed letter “
C ” must be visualised on the display until the motor re-starts
after 50 minutes for another 10 minutes and so on.
Press any key apart from the light keys to return to normal functioning. Press key E to deactivate the function.
ANTI-GREASE/ACTIVE CHARCOAL FILTERS SATURATION
When display item C fl ashes, at a speed where it alternates with the letter F (e.g. 1 and F ), the anti-grease fi lters must
be washed.
When display item C fl ashes, at a speed where it alternates with the letter A (e.g. 1 and A ), the active carbon fi lters must
be replaced or washed depending on the type of fi lter.
After the clean fi lter has been positioned correctly, the electronic memory must be reset by pressing button A for
approximately 5 seconds, until the indication F or A shown on the display C stops fl ashing.
If the display C does not stop fl ashing, repeat the operation with the motor on.
THE MANUFACTURER DECLINES ALL RESPONSIBILITY FOR EVENTUAL DAMAGES CAUSED BY BREACHING
THE ABOVE WARNINGS.
USE AND MAINTENANCE