Freetech P6F121, Руководство пользователя

Страница: 43 / 69

BIOS Configuration
BIOS Features Setup 37
External Cache: This setting enables the Level 2 cache. The default
setting is “Enabled.”
CPU L2 Cache ECC Checking: This item enables or disables ECC
(Error Correction Code) error checking on the CPU cache memory.
The default setting is “Enabled.”
Quick Power On Self Test: This will skip some diagnostic checks
during the Power On Self Test (POST) to speed up the booting proc-
ess. The default setting is “Disabled.”
1
st
/2
nd
/3
rd
Boot Device: Use these three items to select the priority
and order of the devices that your system searches for an operating
system at start -up time. The default settings are “Floppy,” “HDD-0,”
and “LS120,” respectively.
Boot Other Device: If you enable this item, the system will search
all other possible locations for an operating system if it fails to find
one in the devices specified under the first, second, and third boot
devices. The default setting is “Enabled.”
Swap Floppy Drive: If you have two floppy diskette drives in your
system, this item allows you to swap the assigned drive letters so that
drive A becomes drive B, and drive B becomes drive A. The default
setting is “Disabled.”
Boot Up Floppy Seek: If this item is enabled, it checks the geometry
of the floppy dis k drives at start-up time. You don’t need to enable
this item unless you have an old diskette drive with 360K capacity.
The default setting is “Enabled.”
Boot Up Numlock Status: If set to “Off,” the cursor controls will
function on the numeric keypad. The default setting is “On.”
Gate A20 Option: This option accesses memory above 1 MB using
the fast gate A20 line when set to “Fast”. The other option is “No r-
mal.” (default)
Typematic Rate Setting: If set to “Enabled,” enables you to set the
Typematic Rate and Typematic Delay. The default setting is “Dis-
abled.”