Freescale Semiconductor PE Micro Cyclone Pro, Руководство пользователя

Страница: 134 / 158

128 Cyclone PRO User Manual
CYCLONE PRO
13.19 68HC908JR
Figure 13-19: 68HC908JR Family MON08 Pinout
The target GND is connected to the Pin 2 of the target MON08 Header.
The target RESET line is directly connected to the Pin 4 of the target MON08
Header.
The target IRQ line is directly connected to the Pin 6 of the target MON08
Header.
PORTA0 from the target processor is connected to the target MON08 Header
Pin 10, acting as the communications line. The Cyclone PRO pulls up this
signal with a 10K Ohm resistor to the target VDD.
PORTA1, PORTA2 and PORTC1 are used for entering monitor mode. By
default the user may directly bring these signals out to the target MON08
Header as shown, or ensure that they are pulled up/down according to the
image.
13.20 68HC908JW
Figure 13-20: 68HC908JW Family MON08 Pinout