Getting Started with the MCUSLK for MC9S12C32 Application Module, Rev. 0
2
Freescale Semiconductor
Software Setup
Software Setup
The following software installation is a one-time, required procedure per host PC that you intend to use
with the MCU Project Board – 2. After completing the software setup section on your host PC, you can
then skip the software section on subsequent uses of your project board and begin with the hardware
setup or development sections.
1.
To install and register CodeWarrior development tools for HC(S)12 MCUs onto a host PC, follow
the instructions outlined in sections A, B, and C of the CodeWarrior Development Studio for
Freescale 68HC(S)12 Microcontrollers quick start pamphlet found inside the supplied 3-cd case
labeled CodeWarrior Development Studio for HC(S)08 Special Edition and HC(S)12 Special
Edition. Make sure to request the special edition license when registering.
1
The special edition
license version of CodeWarrior is necessary for developing applications for the MC9S12C32 MCU
application module board.
2.
Install a CodeWarrior service patch labeled
“CW12_V3_1_ICD12_USB2_0_Sim_patch.exe”
located in the Service Pack CD found inside the supplied 3-cd case labeled CodeWarrior
Development Studio for HC(S)08 Special Edition and HC(S)12 Special Edition. The patch is
located under the
E:\HC(S)12\CW12_V3_1\
directory in the Service Pack CD. Install by double-
clicking on the file and by following the on-screen instructions.
NOTE
The CW12_V3_1_ICD12_USB2_0_Sim_patch.exe is REQUIRED for the
USB multilink pod on the MCU Project Board – 2 to function with the
Metrowerks CodeWarrior development tools and must be installed prior to
the hardware setup section. Other patches included on the Service Pack
CD are recommended if developing an application on a HC(S)12
microcontroller other than the MC9S12C32.
NOTE
Periodically check the corresponding development tool product page for
patches and updates. For questions on CodeWarrior development tools,
contact
1. Registering will email you instructions for how to acquire the special
edition license. After you acquire the special edition license, place it in the
root CodeWarrior directory. If you encounter problems with registration, you
can acquire your special edition license online at
http://www.metrowerks.com/MW/Develop/Embedded/HC12/Downloads
.
