Freescale Semiconductor MC13853 LNA, Руководство пользователя

Страница: 19 / 22

Basic Test Equipment Setup
MC13853 LNA Evaluation Board User’s Guide, Rev. 1.3
Freescale Semiconductor 3-3
Figure 3-3. MC13853 Noise Figure Test Equipment Block Diagram
3.2 List of Test Equipment
The following test equipment is required:
• Agilent 8753E network analyzer or equivalent.
• HP 8562E spectrum analyzer or equivalent.
• RF power meter, Gigatronics 8542C with sensors or equivalent.
• Two signal generators, HP 8648C or equivalent.
• Agilent N8973A noise figure meter or equivalent with HP 346A noise source.
• DC system power supplies, HP 6632A or equivalent.
• Input isolators.
• Control computer, PC with accessories, Microsoft Windows NT or XP operating system.
• Interconnecting RF coaxial cables, DC and control lines.
MC13853 LNA
Under Test
Supply to
Serial
Interface
Board
HP 6626A Power Supply
Notes:
1) RF Cabling is 50 ohm low loss.
2) RF Connectors are SMA.
3) Zero and Calibrate all RF power sensors before measurement.
4) SPI interface details are not shown
5) Internally calibrate test equipment before using
HB1 In
LB In
LB Out
HB1 Out
HB2 In HB2 Out
Agilent N8973A Noise
Figure Meter
HP346A Noise Source