Freemotion t 7.4 Скачать руководство пользователя

Страница: 10 / 48

6. Align the holes in the Console (101) with the

holes in the handrail assembly and the holes in

the Upright (not shown). Attach the Console and

the handrail assembly to the Upright with two

3/8" x 3 1/4" Patch Bolts (1) and two 3/8" Star

Washers (2).

Do not fully tighten the Patch

Bolts yet. Note: It may be helpful to press the

indicated bracket against the Upright and to

press down on the Console to align the

holes.

5. Have a second person hold the Console (101)

near the handrail assembly.

Gently pull the ends of the Upright Wire (111)

out of the Upright Cover (80). Connect the

Upright Wire and the handrail wires to the con-

sole wires. Make sure that the console wire and

the handrail wire that you are connecting have

connectors that are the same size.

See the

lower drawing. The connectors should slide

together easily and snap into place.

If they do

not, turn one connector and then try again.

THE CONNECTORS ARE NOT CONNECTED

PROPERLY, THE CONSOLE MAY BE DAM-

AGED WHEN THE POWER IS TURNED ON.

Gently pull the ends of the 60" TV Cable (128)

and the 60" AV Wire (129) out of the Upright

Cover (80). Connect the wires to the AV wires

extending from the Console (101).

Insert the excess wires downward into the

Upright Cover (80).

Set the Console (101) on the handrail assembly.

Be careful not to pinch any wires.

101

111

Console

Wires

111

Console

Wire

101

Handrail

Assembly

Handrail

Assembly

Handrail

Wires

Handrail

Wire

Wires

129

Bracket

128

Содержание t 7.4

















































Результаты поиска

Содержание t 7.4

Отзывы:

Похожие инструкции для t 7.4

Бренды по названию

Популярные бренды

Freemotion t 7.4, Руководство пользователя

Результаты поиска

Содержание t 7.4

Отзывы:

Похожие инструкции для t 7.4

Бренды по названию

Популярные бренды