Freemotion t 7.4 Скачать руководство пользователя

Страница: 27 / 48

HOW TO USE THE REMOTE CONTROL

The first time you use the re-

mote control, insert batteries

(see HOW TO REPLACE THE

BATTERIES IN THE REMOTE

CONTROL at the right).

Next, stand on the treadmill and

hold the remote control near the

television. Point the remote con-

trol directly at the television.

Press the Power button ( ). After a few moments, the

television will turn on or turn off.

Press the Volume (VOL) increase or decrease button

to navigate left or right in a menu. For best results,

change the volume by pressing the Volume buttons on

the console only.

Press the Mute button to turn on or turn off the sound.

Press the numbered channel buttons or the Channel

(CH) increase or decrease button to select a channel.

The Channel increase and decrease buttons on the re-

mote also function as the up and down navigation but-

tons in a menu.

Press the Return button ( ) to view the previous

channel.

To select a subchannel, select a channel, press the

Subchannel button ( ), and then press the numbered

channel buttons.

Press the Menu button to view the main menu or to

view a previous menu. See pages 28 and 29 for infor-

mation about the menu.

Press the Exit button to exit any menu.

Press the PRLIST button to view a list of channels. If

you have labeled any channels, the menu will also

show the channel label. See page 29 for information

about labeling channels. Note: You can also view this

list by pressing the PRLIST button on the console.

Press the EPG button to view the electronic program

guide. Note: The electronic program guide is only

available when viewing ATSC digital television.

Press the Info button to view information about the cur-

rent program and the broadcast or cable signal.

Press the CC button repeatedly to turn on or turn off

closed captioning. See step 5 on page 28 to adjust

closed captioning settings.

Press the TV/AV button repeatedly to select the input

source. To view television channels through an an-

tenna or a CATV cable, select the TV source. To use

the 96" AV Cable, select the AV source.

Press the MTS button repeatedly to select mono,

stereo, or SAP (secondary audio programming) as the

audio setting.

Press the Format button repeatedly to select auto, 4:3,

or wide image as the display format. Note: The auto

display format is only available when viewing ATSC

digital television.

Press the Pict button repeatedly to select standard, dy-

namic, soft, or personal as the image mode.

Press the Audio button repeatedly to select standard,

music, movie, or personal as the audio mode.

HOW TO REPLACE THE BATTERIES IN THE

REMOTE CONTROL

To replace the batteries,

first locate the battery

cover on the back of the

remote control. Push

down lightly on the bat-

tery cover with your

thumb and slide off the

battery cover.

Next, remove the old batteries from the remote control,

and insert two new “AAA” batteries.

Make sure to in-

sert the batteries as shown in the drawing.

Then,

slide the battery cover onto the remote control.

Содержание t 7.4

















































Результаты поиска

Содержание t 7.4

Отзывы:

Похожие инструкции для t 7.4

Бренды по названию

Популярные бренды

Freemotion t 7.4, Руководство пользователя

Результаты поиска

Содержание t 7.4

Отзывы:

Похожие инструкции для t 7.4

Бренды по названию

Популярные бренды