
22
HOW TO USE A CUSTOM WORKOUT
1. Insert the key into the console.
See step 1 on page 15.
2. Select one of the custom workouts.
To select a custom workout, press the Custom
Workouts button repeatedly until the desired workout
appears in the display.
The display will show the name, the maximum in-
cline setting, the maximum speed setting, and the
duration of the workout. Note: To create a custom
workout, see step 3 on page 24.
Press the Enter button to select the desired work-
out. Select your age and then your weight using the
increase and decrease buttons next to the Enter
button. Press the Enter button after each
selection.
3. Press the Start/Stop button to start the workout.
A moment after you press the Start/Stop button,
the treadmill will automatically adjust to the first
speed and incline settings that you programmed
previously. Hold the handrails and begin walking.
Each custom workout is divided into one-minute
segments. One speed setting and one incline set-
ting are programmed for each segment.
During the workout,
the profile will show
your progress.
The flashing seg-
ment of the profile
represents the
current segment
of the workout. The height of the flashing segment
indicates the incline setting for the current segment.
At the end of each segment, a series of tones will
sound and the next segment of the profile will begin
to flash. If a new speed or incline setting is pro-
grammed for the next segment of the workout, the
speed or incline setting will appear at the top of the
display for a few moments to alert you.
The workout will continue in this way until the last
segment of the profile flashes in the display and the
last segment ends. The walking belt will then slow
to a stop.
If the speed or incline setting is too high or too low
at any time during the workout, you can manually
override the setting by pressing the Speed or Incline
buttons; however, when the next segment of the
workout begins, the treadmill will automatically
adjust to the speed and incline settings for the
next segment.
To stop or restart the workout at any time, press
the Start/Stop button. The speed of the walking belt
will gradually increase to the speed setting of the
current segment.
4. Select a display mode and monitor your prog-
ress with the display.
See step 4 on page 18.
5. Measure your heart rate if desired.
See step 6 on page 16.
6. Turn on the fan if desired.
See step 7 on page 17.
7. When you are finished exercising, remove the
key from the console.
See step 8 on page 17.
VO2 Max
Current Segment