background image

17

HOW TO CONNECT THE POWER CORD

This product must be grounded. 

If it should mal-

function or break down, grounding provides a path of 
least resistance for electric current to reduce the risk of 
electric shock.  

This product is for use on a dedicated, 20-amp,
120-volt circuit. No other appliance should be on 
the same circuit.

 This product has a cord with an 

equipment-grounding conductor and a grounding plug.

Plug the grounding plug into a standard NEMA 5-20 
receptacle. Do not modify the plug or the receptacle. 
Do not use an adapter, a surge protector, or an exten-
sion cord. The receptacle must be grounded.

HOW TO CONNECT A CATV CABLE

If your incline trainer has the digital TV,

 a CATV 

cable must be connected to the incline trainer for cable 
TV stations to be viewed. 

Locate the Upright 
Coaxial Cable 
(125) at the front 
of the incline 
trainer. Connect 
the CATV cable to 
the Upright Coaxial 
Cable. Route the 
cable so that it will 
not be pinched 
or crushed by the 
incline trainer. 

A satellite receiver, VCR, or DVD player can also be 
connected to the incline trainer. Connect a CATV cable 
from the coaxial output on your equipment (usually 
labeled TV OUT or RF OUT) to the cable jack on the 
front of the incline trainer.

Note: Audio/video equipment without coaxial outputs 
(some satellite receivers and DVD players) will require 
an RF modulator to work correctly. RF modulators are 
not available from FreeMotion Fitness, but are avail-
able at electronics stores. See the owner’s manual for 
the equipment you wish to connect to determine if an 
RF modulator is needed, or contact your local audio/
visual service provider.

WARRANTY INFORMATION

 The warranty for this product does not cover damage 
or equipment failure caused by electric wiring not in 
compliance with electrical codes or the speci

fi

 cations 

in this manual, or failure to provide reasonable and 
necessary maintenance as outlined in this manual. Any 
failure or damage caused by unauthorized service; 
misuse; accident; negligence; improper assembly or 
installation; debris resulting from any destruction activi-
ties in the product’s environment; rust or corrosion as a 
result of the product’s location; alterations or modi

fi

 ca-

tions without written authorization; or failure on your 
part to use, operate, and maintain the product as set 
forth in this manual will void the warranty.

 

All terms of the warranty are void if this prod-
uct is moved beyond the continental borders of 
the United States of America (excluding Alaska, 
Hawaii, and Canada) and are then subject to the 
terms provided by that country’s local authorized 
FreeMotion Fitness, Inc. representative. 

     DANGER:

 

Improper connection of 

the equipment-grounding conductor increases 
the risk of electric shock. Check with a quali-

fi

 ed electrician or serviceman if you are unsure 

whether the product is properly grounded. Do 
not modify the plug—if it will not 

fi

 t the outlet, 

have a proper outlet installed by a quali

fi

 ed 

electrician. Do not use an adapter to connect 
the plug to an improper receptacle.

NEMA 5-20 

Receptacle

HOW TO CONNECT THE INCLINE TRAINER

125

Содержание FMTK74218.2













































Отзывы: